EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is often a highly efficient solar controller designed for off-grid solar techniques. Dependant on multiphase synchronous rectification technological innovation, it makes certain optimized Electricity conversion and procedure stability for a wide range of photovoltaic (PV) applications.
Important Functions on the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Cost Controller technological innovation for remarkable photo voltaic Electrical power harvesting. Vital options include:
Multiphase Synchronous Rectification (MSR) for enhanced energy conversion.
Advanced MPPT Algorithm with >ninety nine% effectiveness.
Dual-Phase Charging for Increased battery existence.
LCD Show with real-time facts checking.
Multiple Load Management Modes such as guide and timer.
Extensive Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Step-by-Step Guide to Setting Up the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Guarantee all elements are integrated: Tracer AN unit, temperature sensor, interaction cables, and person guide.
Confirm the model quantity and voltage ratings match your photo voltaic panel and battery requirements.
2. Mounting the Cost Controller
Find a very well-ventilated, dry area close to the battery bank.
Secure the Tracer AN controller utilizing the delivered mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Normally observe right basic safety protocols and ensure the system is run off in advance of connecting parts.
Stage one: Hook up the battery terminals towards the charge controller (favourable to beneficial, adverse to destructive).
Action 2: Join the solar panel array to the PV enter terminals.
Phase 3: Hook up the load terminals if utilizing a direct load relationship.
Phase 4: Double-Look at all connections for polarity and tightness.
4. Configuring the Controller Settings
Electricity about the controller by connecting the battery initial.
Utilize the Liquid crystal display display to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Manual, timer, mild control.
5. Checking and Knowledge Logging
The Tracer AN Collection supports genuine-time checking visit here using the MT50 remote meter.
Knowledge may be logged by using the RS485 conversation port utilizing software package for example Solar Station Personal computer.
Distant checking is achievable With all the EPEVER WiFi module.
six. Troubleshooting Frequent Concerns
Issue one: No Power Output
Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge 2: About-Voltage Safety
Validate the solar array’s voltage score.
Adjust process parameters if essential.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings from the menu.
Benefits of the Tracer AN Collection with MSR Technologies
The multiphase synchronous rectification know-how ensures:
Increased Efficiency: Diminished Strength losses through conversion.
Enhanced Dependability: Secure efficiency less than variable loads.
More time Battery Life: Regular and exact charging profiles.
Conclusion
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification engineering is really an Outstanding choice for optimizing solar energy generation and extending battery everyday living. By subsequent the above mentioned set up guide, users can guarantee most efficiency and technique longevity.