EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Demand Controller is actually a highly productive photo voltaic controller created for off-grid photo voltaic systems. Determined by multiphase synchronous rectification technology, it guarantees optimized Strength conversion and process steadiness for a variety of photovoltaic (PV) programs.
Essential Capabilities of your EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller technologies for outstanding solar Strength harvesting. Essential capabilities include things like:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >99% performance.
Twin-Phase Charging for Increased battery everyday living.
Liquid crystal display Display screen with real-time information monitoring.
Numerous Load Manage Modes such as manual and timer.
Comprehensive Electronic Protections towards overcharging, around-discharging, limited circuits, and reverse polarity.
Step-by-Step Manual to Establishing the EPEVER Tracer AN Series Controller
one. Unboxing and Planning the Controller
Assure all parts are involved: Tracer AN device, temperature sensor, conversation cables, and user manual.
Validate the product range and voltage rankings match your solar panel and battery specs.
2. Mounting the Charge Controller
Find a well-ventilated, dry locale near the battery financial institution.
Safe the Tracer AN controller using the offered mounting brackets.
Preserve proper clearance for warmth dissipation.
three. Wiring the Solar Charge Controller
Warning: Normally observe suitable security protocols and ensure the method is powered off before connecting factors.
Action one: Link the battery terminals towards the demand controller (beneficial to constructive, damaging to unfavorable).
Move two: Connect the solar panel array to the PV enter terminals.
Move three: Link the load terminals if using a immediate load link.
Step four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power within the controller by connecting the battery initial.
Use the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, gentle Handle.
five. Monitoring and Data Logging
The Tracer AN Series supports serious-time checking utilizing the MT50 remote meter.
Knowledge is often logged by way of the RS485 interaction port employing software program which include Solar Station PC.
Distant checking is achievable with the EPEVER WiFi module.
six. Troubleshooting Frequent Issues
Challenge 1: No Electric power Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: More than-Voltage Security
Verify the photo voltaic array’s voltage rating.
Alter system parameters if vital.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT options during the menu.
Advantages of the Tracer AN Series with MSR Technological innovation
The multiphase synchronous rectification technologies makes certain:
Higher Effectiveness: Lessened Vitality losses Click Here all through conversion.
Improved Trustworthiness: Stable functionality less than variable loads.
Extended Battery Lifestyle: Reliable and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification engineering can be an Outstanding option for optimizing solar energy generation and lengthening battery life. By adhering to the above mentioned setup guideline, end users can be certain optimum effectiveness and procedure longevity.